Posted by & filed under Uncategorized.

Ok so you went out and purchased that rotary power sweeping kit so when do you use it?  The first main difference between the sweeping styles is the cleaning action, a standard brush scrubs back and forth pushing and pulling manually where as a rotary flail rotates under action of a connected drill. Now let’s look at some of the pros and cons of rotary sweeping kit.

 

pros.

  • One flail fits all so kit does not take up the space of traditional brushes
  • More Effective at removing some hard deposits and nesting material
  • minimal sweat involved the drill takes the strain
  • Can be reversed in the chimney  counterclockwise
  • Quick
  • None or little chance of losing a brush
  • Less physical strength required
  •  less wear and tear on flails when compared to bristles and simple to replace

Cons.

  • Can be overly aggressive on some mortar and or lime chimneys
  •  Batteries can run out
  • very little tactile based feed back through the rods
  • Can be expensive to purchase
  • Can leave soot on horizontal sections
  • Some Customers like the old ways
  • Some partial  blockages can be missed due to the small head size
  • Some liner manufacturers do not approve this method

 

The list above is not exhaustive but gives an idea

Over the years Clean Sweep Chimney Services, chimney sweeps London have tried out lots of kit some we love some not do much. We have found a place in all of our vans for rotary power sweeping kit however we do not use it on every job. In London the chimneys tend to be lined with the old parjette lime mixture and the rotary flail is way too aggressive. Also when we are chimney sweeping Essex we come across many thatched properties with 500 year old flues, this again is no place for the rotary flail.

So where do we use rotary kit then?

We have found that the rotary flail come into its own when cleaning expanded creosote in lined chimneys, removing birds nests, terracotta lined chimneys when there are hard deposits from smokeless coal and anywhere where the access is too small for a traditional brush. Following a cre-away chemical treatment rotary power sweeping is by far the best option.

So in conclusion

only people expertly trained in rotary sweeping with previous experience of traditional methods should be undertaking this work. In the wrong hands a flail and a drill can destroy your 500year old chimney, in the right hands a chimney fire or blockage could be prevented.

it is the opinion of clean sweep chimney services that only chimney Sweeps who are association trained and that have undertaken the manufacturers of their chosen equipment training courses should under take power sweeping.

Rotary power sweeping can be both the best and the worst thing so chose your sweep carefully.

if you found this post useful I would please ask that you share it.

thanks for reading Daniel Hodgson

master chimney sweep

 

The images used in this blog were from Rotary power sweeping

One Response to “To power sweep or not to power sweep that is the question?”

  1. John Cunningham, Bangor Chimney Sweep

    Good article, our wee town has lots of Victorian houses so probably will never get totally away from traditional brushes.
    I’ve been sweeping chimneys for almost 25 years and it is funny how the equipment has evolved over very recent years.
    Imagine going to a customer a few years back and telling her ‘ I’ll get the whip out for your flue missus’ , funny old world!
    Keep safe
    John

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.